Representative offices Conference rooms Small offices General open plan offices Reception and public service areas Corridors and staircases Recreational areas (sport halls, restaurants, cafeterias) Department stores, Fashion shops Small independent food / non-food shops High-end fashion shops, Boutiques

Power supply: 230 V/240 V; 3- or 5-pole connection block prepared for through-wiring 3 x 2.5 mm2. Gear: gear and radio interference condenser integrated in the housing. In HF versions, gear - Class II -positioned beside the luminaire. Lamp position: horizontal. Material: steel, cast aluminum ring, satin finished anodized aluminum reflector. Installation Cutout:185 mm dia. Thickness of false ceiling: 1-24 mm. Method: Fasteners to bend and turns on to the ceiling Safety distance: 0.5 m. Maintenance: direct lamp access.

Low-depth recessed technical downlights with highly efficient 145 mm internal diameter satin finished anodized aluminum reflector. For PL-C compact fluorescent lighting systems. Height of only 100 mm (in closed ceilings 120 mm). Decorative rings, etc.to be ordered separately.

Representative offices Conference rooms Small offices General open plan offices Reception and public service areas Corridors and staircases Recreational areas (sport halls, restaurants, cafeterias) Department stores, Fashion shops Small independent food / non-food shops High-end fashion shops, Boutiques.

Power supply: 230 V/240 V; 3- or 5-pole connection block prepared for through-wiring 3 x 2.5 mm2. Gear: gear and radio interference condenser integrated in the housing. In HF versions, gear - Class II -positioned beside the luminaire. Lamp position: horizontal. Material: steel, cast aluminum ring, satin finished anodized aluminum reflector. Installation Cutout:185 mm dia. Thickness of false ceiling: 1-24 mm. Method: Fasteners to bend and turns on to the ceiling Safety distance: 0.5 m. Maintenance: direct lamp access.

Widespread mirror optics luminaries for surface mounting in ceilings suitable for 'TL'D /'TL' fluorescent lamps.

Small offices Conference rooms Reception and public service areas Recreational areas (restaurants, cafeterias) Shops Food shops Fashion shops / boutiques Specific areas .

Housing made of CRCA sheet steel, powder coated white inside and a choice of white or brown outside, accommodating all electrical accessories prewired upto a terminal block. End plates with decorative finish. Specially designed optical system of high purity aluminum, and painted lamellae renders high optical efficiency and widespread batwing type of light distribution. The reflector is fixed to the housing by a 'clip-on' mechanism and can be hinged to the housing during installation / maintenance. Designed for surface mounting.

CRCA sheet steel, powder coated white Reflector: a) High-efficiency mirror optic of high quality aluminum with parabolic profile with diffuse white lamellae designed for high optical efficiency and widespread batwing type distribution Lamp holders: click-fix type.Installation and Mounting Provision for pendent mounting or direct on surface.

Road lighting luminaries suitable for use with High Pressure Sodium Vapour SON/SON-T 150W/250W lamp.

Major city roads Roundabouts Highways Industrial areas Car parks Features All electrical accessories such as energy efficient copper ballast, electronic igniter, power factor improvement capacitor etc., are prewired upto a terminal block and mounted on a easily detachable gear plate. Flexible optics for energy efficient SON / SON-T lamp to achieve optimum light distribution for most of the roads / installation parameters. Hinging arrangement for acrylic bowl for ease of maintenance. Felt gasket on the periphery of the housing. Conformance to IP 54 protection for lamp and gear compartment. Conformance to relevant IS specifications.

Single piece die cast aluminum (LM6) housing powder coated in attractive gray colour outside: High purity aluminum POT reflector, electrochemically brightened & anodized: High quality long lasting felt gasket impregnated with insecticides and water repellant chemicals on the periphery of the housing: Stainless steel toggles for fixing acrylic bowl to the housing: Hinging arrangement with a set of nylon chords for acrylic bowl. Installation and mounting Pole entry through U clamps suitable for pole diameter of max 60mm.

Road lighting luminaries suitable for use with High Pressure Sodium Vapour SON/SON-T 150W/250W lamp.

Major city roads Roundabouts Highways Industrial areas Car parks Features All electrical accessories such as energy efficient copper ballast, electronic igniter, power factor improvement capacitor etc., are prewired upto a terminal block and mounted on a gear plate which also acts as a cover to the gear compartment. During maintenance, the gear compartment cover is retained with the housing at an angle, which facilitates easy maintenance. Specially designed flexible optics for energy efficient tubular SON-T lamp to achieve optimum light distribution for most of the roads / installation parameters. Optionally conventional pot reflector to suit SON/SON-T lamp can also be provided. Fully covered click-fix cable termination box, provided on the top of the housing ensures ease of connecting the luminaries with incoming supply. Heat resistant and toughened glass cover for minimizing discomfort glare to vehicular traffic.

Hinging arrangement for glass cover for ease of maintenance. Silicon rubber gasket on the periphery of the housing. Conformance to IP 65 protection for lamp and IP 54 protection for gear compartment. Conformance to relevant IS specifications.

Single piece die cast aluminum (LM6) housing powder coated in attractive gray colour outside: High purity aluminum POT reflector, electrochemically brightened & anodized: Die cast aluminum (LM6) powder coated gear compartment cover: Stainless steel chain for retention of gear compartment cover at suitable angle during maintenance: Silicon rubber gasket on the periphery of the housing: Specially designed stainless steel toggles for fixing glass and gear compartment lid to the housing. Installation and mounting Pole entry through U clamps suitable for pole diameter of max 60mm.

Road lighting luminaries suitable for use with High Pressure Sodium Vapour SON/SON-T 150W/250W or High Pressure Mercury Vapour HPL-N 250W lamp.

Major city roads Roundabouts Highways Industrial areas Car parks Features All electrical accessories such as energy efficient copper ballast, electronic igniter, power factor improvement capacitor etc., are prewired upto a terminal block and mounted on an easily detachable gear plate. Flexible optics for energy efficient SON/SON-T lamp to achieve optimum light distribution for most of the roads / installation parameters. Heat resistant and toughened glass cover for minimizing discomfort glare to vehicular traffic. Hinging arrangement for glass cover for ease of maintenance. Option for side as well as pole top mounting. Conformance to IP 54 protection for lamp compartment and IP 33 for gear compartment. Conformance to relevant IS specifications.

Lamp compartment consists of high purity aluminum, electrochemically brightened & anodized inside, powder coated in an attractive gray colour outside: High quality long lasting felt gasket impregnated with insecticide and water repellant chemical on the periphery of the lamp compartment: Die cast aluminum (LM6) gear compartment, powder coated outside: Gear plate for mounting all electrical accessories: Stainless steel toggles for fixing heat resistant and toughened glass cover to the lamp compartment: Hinging arrangement for retention of glass cover to housing during maintenance. Installation and mounting Pole entry through U clamps suitable for pole diameter of max 60mm.

Compact, sturdy general-purpose floodlight with integral gear, suitable for use with High Pressure Tubular Sodium Vapour SON-T 250W / 400W, High Pressure Metal Halide HPI-T 250W / 400W lamp. All-weather construction designed for simple cleaning and speedy servicing.

Billboards Car parks Architecture Sport facilities Industrial areas Security Features High-grade symmetrical or asymmetrical reflector projects a highly efficient light beam. Wall, ceiling and surface mounting with wide ranges of adjustment offer versatile directionality for both down and up-lighting. Rugged, corrosion-resistant housing with integral gear box. Compensated electrical control gear. Quick, easy access to lamp and gear,without affecting beam adjustment, through hinged front window with quick-release clips. Heat-resistant EPR gasket bonded to housing renders the luminaire dustproof and jetproof to IP 65.

Non-corrosive, high-pressure die cast aluminium housing with low copper content and black powder coated finish; electrochemically brightened and anodised high-purity stippled aluminium reflector; heat resistant toughened glass; EPR gasket; M.S. powder coated mounting bracket. Front glass with quick-release hinge-clips for in-position lamp replacement.Housing dustproof and jetproof to IP 65; no internal cleaning required.

High performance flood light luminaire suitable for use with High Pressure Sodium Vapour SON-T 250W/400W, Metal Halide HPI-T 250W/400W with appropriate control gear.

Container terminals Railway marshalling yards Open storage yards Architecture Sports stadia Features Sturdy, die cast aluminium housing ensures excellent corrosion resistance. Heat resistant silicone rubber gasket renders IP 54 protection Quick and easy lamp replacement from rear without disturbing the aiming position. Stainless steel toggles. Heat resistant & toughened glass cover. A graduate disc facilitating proper aiming of the luminaire. Conforms to IP 54 protection. Conforms to relevant IS specifications.

Die cast aluminium, MBV treated housing; Die cast aluminium, MBV treated back plate; High purity aluminium reflector, electrochemically brightened and anodised; Heat resistant and toughened glass cover;Ethylene-propylene rubber (EPR) gasket. Installation and mounting Universal mounting bracket allows wall or surface mounting.

Efficient, low glare,recessed integral luminaires specially equipped for lighting of filling stations or other canopies. Luminaires are suitable for use with High Pressure Metal Halide HPI-T 250W/400W lamp.

Service stations Areas with overhead canopies Features Excellent,uniform, light distribution with an asymmetric beam (MPF 111) or a bidirectional beam (MPF 112) ensured by stippled aluminium, anodised & brightened reflectors. The beam pattern create excellent outstanding vertical illuminance as required on vertically oriented objects like pump islands. Specially designed mounting arrangement allows quick & easy installation. Heat resistant, toughened glass covering both lamp & gear compartment provides single window for maintenance / installation. Silicon rubber ceiling gasket makes the luminaire insect free & provides IP 54 protection (from under canopy) Hinging arrangement for glass cover.

M.S., black powder coated housing; Stippled aluminium reflector,electrochemically brightened & anodised; Heat resistant & toughened glass; Silicon rubber sealing gasket. Installation and mounting Mounting frame for firm recessed fixing in cladding. Front glass with quick-release fasteners.